Bamboo Industrial consists of small floor ‘boards’ made from short solid bamboo strips, creating the specific industrial look. The ‘boards’ are in fact blocks of strips bundled together with tape (so no glue is used in the product itself!).
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
The floor installer glues them on the subfloor, sands off the tape, fills the gaps and finishes the surface. Being made of such small strips, the floor is very stable – making it the perfect solution for application on floor heating.
installation summary (full version available on www.crownbamboo.eu)
Check room climate conditions (room temp. 18-20°C, air humidity 50-65%).
Check subfloor: this should be flat/clean/stable and should not exceed the maximum allowed moisture content (for example 1.8% for sand cement).
The floor should be fully glued (for glue details see full version of installation instruction).
Elastic adhesive systems like 1-component Polyurethane or silan type of adhesives only can be used, when:
Shear strength Ts > 1.4 N/mm² (3 days balanced at 23 degrees Celsius/50% Air Humidity)
Shear elongation y >=0.5 (3 days balanced at 23 degrees Celsius/50% Air Humidity) Please ask your glue supplier for more information.
After the glue has hardened, the floor can be sanded, filled (with a mixture of sanding dust and floor filler) and finished (with floor lacquer or oil).
This floor type can be installed – under certain conditions – on warm water floor heating. See “Crownbamboo flooring and floor heating“.
After installation: make sure proper cleaning and maintenance is done, fitting to the chosen finish.
Attention: the width of the individual bamboo strips can vary between approx. 4 and 8mm (High Density 13-14mm). MOSO guarantees that within 1 delivery the variation in strip width is limited.
BEIJING / bf-pr150
Gross density Bamboo
700 kg /m3 for bamboo
ca 4.0 N / mm2
EN 13501-1-2002 Building material class B1 to DIN 4102 (UK: Standard BS 476 Part 7)
Shrink and swelling
0,14% per 1% change in moisture content
10% at 20 C and 65% rel. Humidity; 8% at 20 C and 50% rel. humidity
For cleaning and maintenanceof allnaturaloiledwood
Ideal cleaningandcareforalloiledu. Waxed woodsurfaces. Especially suitableforflooring,furniture, panelsandworktops, etc.. Bymoisturizingproperty of thewoodfloor soap, the surface receivesoptimum protection. Suitable for allknown oilsystemsfor cleaning and maintenance.