Woven Top Click floor "Anhui"

Reference: HongKong

64.22 Save 15%

(46.54 m²)

Tax included

Woven Top Kick parquet is a 3 ply bamboo flooring with a 2.5 mm thick layer of combam, pressed on a HDF carrier material and a softwood return. With this structure in connection with the Uniclic system that bamboo flooring is easy to install.

Top Surface
Box Content
Delivery in 5-6 business days


Security policy (edit with Customer reassurance module)


Delivery policy (edit with Customer reassurance module)


Return policy (edit with Customer reassurance module)

installation summary (full version available on www.crownbamboo.eu)

• Check room climate conditions (room temp. 18-20°C, air humidity 50-65%).

• Check subfloor: this should be flat/clean/stable and should not exceed the maximum allowed moisture content (for example 1.8% for sand cement).

• The floor should be installed floating (max width 7m, max length 12m, using expansion gaps) but can also be fully glued to the subfloor (for glue details see full version of installation instruction).

• If your bamboo engineered boardis equipped with a click system, you can install the floor without using glue.

• This floor type can be installed – under certain conditions – on warm water floor heating. See “Crownbamboo flooring and floor heating“.

• After installation: make sure proper cleaning and maintenance is done, fitting to the chosen finish.


CAD drawing for top-clicking parquet-woven  pictogram for woven-top-click parquet

HongKong / bf-sw1210-L01

Data sheet

Gross density Bamboo
+/- 700 kg/m³ (SP/PP), +/- 1050 kg/m³
Brinell hardness
≥ 4 kg/mm² (SP/PP), ≥ 9,5 kg/mm² (EN 1534)
Fire resistance
Class Cfl-s1 (EN 13501-1)
Modulus of Elasticity
USRV 31 (Glatt) / USRV 28 (Geburstet) (CEN/TS 15676)
Durability & strength
Class 5 (EN 350)
Use Class
Class 1 (EN 335)
Shrink and swelling
0,14% per 1% change in moisture content
Moisture content
10% at 20 C and 65% rel. Humidity; 8% at 20 C and 50% rel. humidity
thermal conductivity
0,17 W/mK (SP/PP), 0,18 W/mK (CB) (EN 12667)
Thermal resistance
0,0591 m2K/W (SP/PP), 0,0542 m2K/W (CB) (EN 12667)
Emission Formaldehyde
0.01 mg/m3 (E1 Norm: max. 0.124 mg/m3)

Specific References



Datenblatt 3-S-Top Klick

Download (240.91k)

Verlegung Klick

Download (133.41k)

You might also like

Product added to compare.